Huskie Tools REC-530Y Operating Instructions Manual

1, Huskie Tools REC-530Y Operating Instruction Manual REC-530Y Battery Powered Cutting Tool with Parts List HUSKIE TOOLS, INC. …

2, 1http://www.huskietools.com [email protected] REC-530Y SPECIFICATIONS C RIMPING TOOL (REC-530Y) BATTERY CARTRIDGE (BP-70E) BATTERY CHARGER (CH-35R) OPTIONAL ACCESSORIES STANDARD ACCESSORIES BATTERY POWERED SCISSOR-TYPE CUTTER 1-3/16” JAW OPENING • Cuts ACSR up t…

3, Huskie Tools REC-530Y 2http://www.huskietools.com [email protected] STANDARD ACCESSORIES OPTIONAL ACCESSORIES BATTERY CARTRIDGE BP-70E BATTERY CHARGER CH-35R CARRYING CASE REC-458CASE SHOULDER STRAP ROB-S01 DC CHARGER CH-70DCH BATTERY CARTRIDGE BP-70EI GUIDE TO CUTTING CYCLES…

4, 3http://www.huskietools.com [email protected] 1. Select only the appropriate material to be cut. Cutting materials other than those specified will result in severe tool damage and may cause personal injury. Consult factory if you have any questions about cutting capacities.…

5, 4http://www.huskietools.com [email protected] OPERATING INSTRUCTIONS 1 Insert the plug end into a 120V power source. The LED indicator will flash red indicating the charger is now in “stand-by” mode and ready to charge the battery. Do not plug the charger into …

6, Huskie Tools REC-530Y 5 http://www.huskietools.com [email protected] OPERATING INSTRUCTIONS CUTTING: 1. Retract blades by pressing the release button. 2. Make sure that material being cut is within the specified cutting capacity of the tool. 3. Place the material to be cut between the bl…

8, 7http://www.huskietools.com [email protected] MODEL REC-530Y PARTS LIST 1 M4 X 20 Screw 558-01 6 49 PS-8 Pent Seal 16-44 1 2 Housing ( R ) 558-02 1 50 P-8 Back-Up Ring (B.C.) 85-33 1 3 M3 X 6 Screw R150-02 1 …

9, Huskie Tools REC-530Y 8http://www.huskietools.com [email protected] PROBLEM CAUSE SOLUTION MOTOR RUNS, BUT THE TOOL JAWS WILL NOT ADVANCE Insufficient Hydraulic Oil Consult Factory for Repair Service Air Block in Hydraulic System Invert tool to allow air to rise towards the top of the oil bladder D…

10, All Huskie REC-Series battery driven products carry a 5 year warranty, and the ECO-Series carry a 3 year warranty. The BP-70E, BP-70EI, and the BP-70MH batteries carry a 5 year warranty from the date stamped on the battery. The LED indicator on the BP-70-EI battery carries a …

11, Huskie Tools REC-530Y H OW TO GET SERVICE UNDER THE TERMS OF THE LIMITED WARRANTY Return your product directly to Huskie Tools, Inc. as our representative network is not prepared to service the product under the terms of this warranty. 1. Write, call or fax Huskie stating the tool’s purchase da…

12, 198 N. Brandon Drive Glendale Heights, Illinois 60139 (630) 893-7755 Fax (800) 345-3767 Toll Free 1-800-860-6170 http://www.huskietools.com [email protected] …