Omron F400 Introduction Manual

25, 24 2. Select the scene mode. Select "Color pickup". Register the color to be picked up. Set the region with "Area & gravity". 3. Adjust the image. 5. Set the output. 6. Check the measurement. 7. Measure the objects. Select "MONitor" m…

9, 8 1-2 Color Filter Mode Stable measurement of the object that is hardly detected in monochrome image. ● Detection of surface defect ● Amount of adhesive. Settings -> p.14 <Applications> Surface defects on bottle caps. Inspect the amount of adhesive that…

6, 5 SECTION 1 FEATURES F400 measures the image using color information of color image. Select a scene mode out of two processing modes, "color pickup mode" and "color filter mode", according to the application. The information contained in th…

35, Omron F400 34 11 Select "1." and press the ENTer key. 12 Repeat the steps 4 to 11 , set "1." to "R1.MA" and set "2." to "R2.MA". Press the ESCape key several times and the screen of 1 will appear. 8 Select "Upper&…

30, 29 OMRON OMRON OMRON Ice Cream Ice Cream Ice Cream Strawberry Vanilla Lemon 2-3 Ice Cream Separation 2-3-4 Setting Measurement Region 1 2 3 Select "Measurement region" and press the ENTer key. Select "Area & gravity" and press the ENTer key. Set the me…

8, Omron F400 7 (Ex.) When red is selected. Region 0: Only red will be regarded as inspection object. Region 1: Only green will be regarded as inspection object. Only red will be picked up. Other colors will turn black. <How to convert the image> Even if at the end of a part of pink…

26, Omron F400 25 OMRON OMRON OMRON Ice Cream Ice Cream Ice Cream Strawberry Vanilla Lemon 2-3 Ice Cream Separation 2-3-1 Changing Operating Mode The following screen will be displayed after the power is turned ON. Use the Right Key to move the cursor to "MONitor" and press the EN…

4, 3 General Precautions, Visual Aids 4 SECTION 1 FEATURES 5 1-1 Pickup Mode 6 1-2 Color Filter Mode 8 SECTION 2 MEASUREMENT 11 2-1 Starting and Quitting 12 2-2 Surface Defects on Bottle Caps 14 2-2-1 Changing Operating Mode 15 2-2-2 Selecting Scene Mode 16 2-2-3 Adjusting Images …

21, 20 Select "Conditions" and press the ENTer key. 8 Change the numeral with a one-digit cur- sor appeared on the display. Use the Left and Right Keys to move the cursor to the digit to be input. Use the Up and Down Keys to change the numeral. 9 6 Specify lower-ri…

31, 30 8 9 7 6 Select "Region" and press the ENTer key. Select "Box" and press the ENTer key. Select "OR" and press the ENTer key. "OR" is for setting the region, "NOT" is for partly erasure. 4 5 Select "Color no."…