VocoPro UHF-5800 Owner's Manual

9, 8 Before getting started Before starting any installation procedures, it is recommend to completely unpack all the package contents. The original packaging should be kept in the event that re-shipping is needed. Upon unpacking the UHF-5800, you should have received the followin…

7, 6 Specifications Receiver Carrier Frequency Range: UHF 730~790MHz Oscillation Mode: Quartz Controlled Fixed Frequency Stability: 10 PPM Sensitivity: 1.6uV @ sinad =12dB Max. Deviation Range: 50Hz S/N Ratio:>105dB T.H.D.: <0.5% @ 1kHz Image rejection: 85dB typi…

10, VocoPro UHF-5800 9 To install the UHF-5800 to a 19” rack case, complete the steps below. 1. Attach mounting brackets to the UHF-5800 via the supplied mounting screws. 2. Align the UHF-5800 with the desired space in rack and slowly slide in, rear panel first. 3. While aligned, u…

5, VocoPro UHF-5800 4 Welcome... And Thank you for purchasing the UHF-5800 from VocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, Vo coPro is a leading manufacturer of…

2, VocoPro UHF-5800 1 Table of contents Safety instructions ............................................................................................................. 2 FCC information ............................................................................................…

12, VocoPro UHF-5800 11 Front and rear panel descriptions and functions 1. ANTENNAS - Provide both RF and AF signals. 2. POWER (LED) - Indicates whether the UHF-5800 is ON or OFF. When it is lit, the power is ON. 3. RF (LED) - Lights when RF signals are received from the microphone channels. 4. AF…

8, 7 Microphone basics Microphone Position The UHF-5800 is ideal for close-up vocals and can be held in the hand or mounted on a mic stand. The most common applications and placement techniques are listed below. Keep in mind that microphone technique is …

1, o w n e r ' s m a n u a l THE SINGER'S ULTIMATE CHOICE UHF-5800 Features: • 4 mic outputs • 4 wireless handheld mics included • Individual Volume controls for precise vocal balancing • 4 independent field-replaceable Modules (no need for tools) …

13, VocoPro UHF-5800 12 Maintenance procedures Handheld Microphone Battery Installation 1. To remove the lid, press down on the tab and slide the lid down towards the bottom of the mic. 2. Insert 2 fresh 1.5-volt AA alkaline batteries. Make sure the batteries are inserted in the right direction…

4, 3 FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Vocopro may void your authority, gra…

11, 10 Getting connected System Connection 1. Connect the AC POWER ADAPTER to the UHF-5800 receiver’s POWER INPUT connector, then plug the ADAPTER into a compatible AC electrical outlet. 2. Connect the UHF-5800’s receiver to a sound system, mixer or amplifier’s micr…

3, VocoPro UHF-5800 2 Safety Instructions CAUTION RISK OF SHOCK CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user- serviceable parts inside. Only refer servicing to qualified service personnel. WARNING To reduce the risk of fire or electric shock, do no…

15, 14 Troubleshooting Problems No sound output, RF/AF LED(s) are not glowing Received signal is noisy or contains extraneous sounds with the microphone(s) ON. There is noise coming from the receiver with the microphones turned OFF. Momentary loss of sound as microphone(s)…