VIPowER VP-8059 Installation Manual

1, We are your DataBridge TM http://www.vipower.com Installation Manual MODEL VP-8059 MODEL VP-8059L FireWire 1394dock Docking Kit for use with Mobile Rack Removable Docking Modules with 3.5"/2.5" HDD or Optional zip T, , , SuperDisk TM LS-120, MO, TR-4 Tape, Digital Fil…

2, PROPRIETARY NOTICE ViPowER Inc. makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. ViPowER Inc. shall not be liable for errors contained herein or for inci…

3, VIPowER VP-8059 FireWire 1394dock Installation Manual 1 1-1 Introduction Congratulations on your purchase of the FireWire 1394dock Docking Kit. The FireWire 1394dock is an external 1394 interface adapter which is designed to enable hot-swap, plug-and-play operation of Enhanced IDE or A…

4, 2 FireWire 1394dock Installation Manual 1-1.2 ATA/ATAPI Device Compatibility • ATAPI removable drives: Iomega Zip 100MB/250MB and Clik!, LS-120 Super Floppy, Sony HiFD 200MB, MO drives, tape drives • Enhanced IDE and ATA hard drives: both 2.5” and 3.5” form factors, an…

5, VIPowER VP-8059 FireWire 1394dock Installation Manual 3 2-1 Installation Refer to the following for setup of the FireWire 1394dock for operation. • For Mac ® user’s: A software driver is required for operation of the FireWire 1394dock with Mac computers. This must be purchased sepa…

6, 4 FireWire 1394dock Installation Manual 2-1.2 Setting Up the FireWire 1394dock for Operation Perform the following steps (in the order given) to set up the FireWire 1394dock with your peripheral device for operation: 1. Plug the FireWire 1394dock’s 50-pin connector i…

7, VIPowER VP-8059 FireWire 1394dock Installation Manual 5 2. Using the +5V/+12V AC/DC Power Adapter: a. With the power switch in the OFF position, plug in the 6-pin connector-end of the power adapter into its corresponding +5V/+12V power-in connector on the FireWire 1394dock. b.…

8, Printed on recycled paper. 3-1 Disconnecting the FireWire 1394dock Perform the following steps to disconnect the FireWire 1394dock from your computer. 1. Turn off the power by sliding the power switch on the 1394dock to the OFF position. (Note that the drive ico…