Roland XV-5050 Owner's Manual

103, Roland XV-5050 103 Chapter 4 Using the XV-5050 Effects Chapter 4 Reverb Parameters These settings allow you to select the desired type of reverb and its characteristics. Copying Effect Settings You can copy the effect settings from any Patch, Performance, or Rhythm Set …

143, 143 Patch List Appendices PD (Preset D Group) PE (Preset E Group) No. Name Voice Key Assign 001 Echo Piano 3 POLY 002 Upright Pno 3 POLY 003 RD-1000 3 POLY 004 Player's EP 2 POLY 005 D-50 Rhodes 4 POLY 006 Innoce…

171, 171 MIDI Implementation Appendices | | | 10, 20, 30, 40, 50, 60, 70, 80, | | | | 90, 100, 200, 300, 400, 500, | | | | 600, 700, 80…

77, 77 Chapter 4 Using the XV-5050 Effects Chapter 4 7: AUTO WAH A filter that turns on and off to create a cyclical change in timbre. fig.02-007m 8: ROTARY The Rotary effect simulates the sound of the rotary speakers often used with the classic electric organs. …

53, 53 Chapter 1 Creating a Patch Chapter 1 Adjusting Effect Settings Refer to “Patch/Rhythm Set Mode Settings” (p. 70). Saving Patches You Create Refer to “Saving a Patch” (p. 104). Copying Settings Between Patches (Patch Tone Copy) Tone settings fr…

130, 130 Installing & Setup the Driver 14. The “Found New Hardware Wizard” will appear. Make sure that “Roland XV-5050” is displayed, and click the “Finish” button. 15. The “System Settings Change” dialog box will appear.…

121, Roland XV-5050 121 Installing the Wave Expansion Board Appendices Next, check to make sure the board has been installed properly. 1. Use the procedure in “Turning On the Power” (p. 14) to turn the power on. 2. Press [SYSTEM] to make its indicator light. 3. Press [ CURSO…

99, Roland XV-5050 99 Chapter 4 Using the XV-5050 Effects Chapter 4 83: GTR MULTI C (Guitar Multi C) 84: CL GTR MLT A (Clean Guitar Multi A) fig.02-084m Parameter Value Description OD/Dist Switch OFF, ON Turns the Overdrive/Distortion on/off. Type OVERDRIVE, DISTOR…

149, 149 Rhythm Set List Appendices 28 29 31 33 35 30 32 34 39 40 41 43 45 47 42 44 46 36 38 37 87 88 84 86 85 51 52 53 55 57 59 54 56 58 48 50 49 63 64 65 67 69 71 66 68 70 60 62 61 75 76 77 79 81 83 78 80 82 72 74 73 C2 C3 C4 C5 C6 96 89 91 93 95 90 92 94 C7 98 97 Note No. …

30, 30 Playing Sounds Using an External MIDI Device to Select Patches and Change Other Settings Selecting Patches and Rhythm Sets You can change Patches – including the Patches in each Part of a Performance – and Rhythm Sets on the XV-5050 via MIDI Part. In this ex…

56, 56 Chapter 2. Creating a Rhythm Set Setting up Individual Rhythm Tones EFFECTS Patch/Rhythm Set Mode Settings (p. 70) CONTROL Other Settings (p. 61) WAVE Modifying a Rhythm Tone’s Waveform and Panning (p. 57) PITCH Modifying a Rhythm Tone’s Pitch (p. …

9, Roland XV-5050 9 Contents Synchronizing Multi-Effects to the System Tempo................................................................ 115 Making a Tone’s Delay Time Match the System Tempo....................................................... 116 Using a Pedal Switch t…

157, Roland XV-5050 157 MIDI Implementation Appendices ● OMNI OFF (Controller number 124) Status 2nd byte 3rd byte BnH 7CH 00H n = MIDI channel number: 0H - FH (ch.1 - 16) * The same processing will be carried out as when All Notes Off is received. ● OMNI ON (Controller number 1…

54, Roland XV-5050 54 Chapter 2. Creating a Rhythm Set How Percussion Instruments Are Organized A Rhythm Set is a collection of Rhythm Tones, each of which represents a percussion instrument played on a single key. An instrument consists of the following four elements. fig.2…