Nubert nuPro X-6000 RC Operating Manual

16, 1.1. Nubert (Nubert electronic GmbH, Goethestraße 69, 73525 Schwäbisch Gmünd, Germany) grants a special manufacturer‘s warranty to the purchaser on certain prod- ucts of the Nubert brand, for which we state this in the offers or in the corresponding product documents, or for…

5, Nubert nuPro X-6000 RC 5 Setup The nuPro X are high-quality, very neutral active stereo loudspeak- ers. They impress with an extremely homogeneous, precise, and “direct” sound reproduction with the nest resolution in the entire frequency spectrum. However, even “honest loudspeake…

4, Nubert nuPro X-6000 RC 44 Unpacking and Scope of Delivery Unpacking Avoid using sharp or pointed objects when unpacking your speak- ers. Please keep the packaging in a safe place in case you need to transport the speaker at a later date. Scope of delivery If the delivery is complete…

15, Care and cleaning tips Caution! Improper handling of the speaker may result in damage. • Always unplug the speaker before cleaning it! • Before recommissioning, make sure that all connections are cor- rect, that there are no short circuits and that the spe…

9, Nubert nuPro X-6000 RC Conguring a stereo pair All nuPro X loudspeakers have the same functions and the con- nections. Depending on placement and usage, congure your loud- speakers in one of the following ways. Note: Always connect your sources to the master loudspeaker when using master/slave …

11, These settings allow to select the mode of operation. If you want to congure each loudspeaker individually, select single. You now have complete access to all conguration options. The standby power consumption in single mode is < 1 watt. If you want use your nuPros …

1, 17 Wireless Active Speakers Safety instructions Operating manual Technical data Warranty terms nuPro X-6000 RC If you have any questions or problems with the commissioning of your Nubert system, please feel free to contact our service team. Please have your customer number re…

7, USB-connection to a computer Select the USB input on the nuPro master-loudspeaker. Windows 10 / 11 Automatic Installation Connect the master speaker to your computer with a suitable USB cable (included) and switch on the loudspeaker. Normally, Win- dows will automatical…

13, 20 50 100 200 500 1k 2k 5k 10k 20 k Frequency (Hz) -10 -20 -30 -40 -50 -60 Volume controller setting [dB] Construction and technology Tilt Control The midrange/treble adjustment of the nuPro loudspeakers has the characteris…

10, Pressing in the volume menu will access the main menu. Pressing this key will always take you back to a higher menu level. By pressing or you can access the different menus and change their settings. By pressing you will enter a sub-menu. Pressing …

14, Nubert nuPro X-6000 RC Further Applications Connecting a subwoofer If you wish to connect a subwoofer to your nuPros, you have two options: You can connect your subwoofer at the SUB-output of the Master loudspeaker. This output outputs a lowpassed, summed mono sig- nal. You can set the crossove…

2, Nubert nuPro X-6000 RC Device approval and conformity with EC directives Nubert electronic GmbH hereby declares that this product complies with the 2014/53/EU directives, provided that it is installed and used in accordance with the manufacturer‘s instructions. The full text of the EU Declara…