cinetto B-MOVED PS40 Quick Use Manual

17, cinetto B-MOVED PS40 17 00:00:02 1. Pairing To start the procedure, press and hold the button for the channel you want to confi gure (“SENSOR SET A” or “SENSOR SET B”) for two seconds, the corresponding LED will start to fl ash. …

18, 18 2. Reset To reset a channel, press and hold the corresponding button for 10 seconds. The LED will start to fl ash and then remain steady for two seconds. Once it stops fl ashing, the reset procedure is completed and it will be possible to pair again to the ch…

20, 20 4 th edition - NOVEMBER 2020 Cinetto F.lli S.r.l. Via Rossi, 5/A 35030 Rubano (PD) Italy Tel. +39 049 8977211 Fax +39 049 635822 www.cinetto.it [email protected] This article is part of the B-MOVED electrical system for opening and closing the cabinet doors. It must be i…

3, cinetto B-MOVED PS40 3 Before installing Wave Sensor, it is necessary to have installed the B-moved electrical system. PS40 & B-MOVED W1 W1 A CONFIGURATION …

13, 13 W2 W4 W1 W1 W4 W3 W2 W1 W1 W3 G CONFIGURATION W1, W4 = SYNCHRONIZED OPENING W1 = SYNCHRONIZED OPENING …

7, 7 W2 W4 W1 W1 W4 W3 W2 W1 W1 W3 G CONFIGURATION W1, W4 = SYNCHRONIZED OPENING W1 = SYNCHRONIZED OPENING …

16, cinetto B-MOVED PS40 16 Wave Sensor positioning 3821 71,5 23 option MAX 10 MAX 10 MAX 10 Do not place Wave Sensor behind metallic, conductive materials or mirrors. 102 68,5 5 …