AMGO PRO-12 Installation And Service Manual

27, AMGO PRO-12 - 26 - Item Part# Description PRO-12 PRO-12A PRO-12AX 37 11610667 Drive-in Ramp pulley pin 4 4 4 38 10209010 Snap ring 8 8 8 39 10420156 Protecting Ring 1 1 1 40 10420045 Washer 20 20 20 41 11420004 Pin for Drive-in Ramp 2 2 2 42…

22, AMGO PRO-12 - 21 - N. Install Electrical System Connect the power source on the data plate of Motor. Note: 1. For the safety of operators, the power wiring must contact the floor well. 2. Pay attention to the direction of rotations when using 380V, three phase motors. Si…

24, - 23 - IV. EXPLODED VIEW Model: PRO-12 1 2 3 8 18 44 203 32 49 12 50 51 52 53 45 Fig.46 4 …

36, - 35 - VIII. TROUBLE SHOOTING IX. LIFT DISPOSAL: When the car lift cannot meet the requirements for normal use and needs to be disposed, it should follow local laws and regulations. TROUBLE CAUSE REMEDY Motor does not run 1. Start Button does not work 2.Wiring con…

14, AMGO PRO-12 - 13 - 46 I. Assembly offside platform and slider block, (See Fig. 24) check the plumbness of columns with level, adjusting with the shims if not, and then tighten the anchor bolts (See Fig. 25). Using the ratchet spanner with socket to tighten the bolts Fig. 2…

10, - 9 - D. Install cross beams (See Fig. 14, Fig. 15). Fig. 14 Fig. 15 2 Hole towards inside 1 3 3 …

28, - 27 - Item Part# Description PRO-12 PRO-12A PRO-12AX 71A 10420131B Black Air Line 1 1 1 72 10420167A Black Air Line 1 1 1 73 11476635 Pulley 4 4 4 74 10476024 Pulley washer 8 8 8 75 1040101 Tureplate 0 2 2 76 11430004 Cover for T…

37, - 36 - AMGO HYDRAULIC CORPORATION Tel: (803) 505-6410 Fax: (803) 505-6410 Manual Part No.: 72147702 Revision Date: 2020/01 1931 Jo Rogers Blvd, Manning, South Carolina, USA …

2, AMGO PRO-12 CONTENTS Product Features and Specifications ..................................................... 1 Installation Requirement .................................................................... 2 Steps of Installation ....................................................…

15, - 14 - J. Install cables 1. Pass through the cables from the platform to the columns according to the number of the cables (See Fig. 26). No. Cable ○ 1 ○ 2 ○ 3 ○ 4 Model Length (w/ fitting) 148-5/8” 406-1/2” 211-3/4” 343” PRO-12 PRO-12A …

8, AMGO PRO-12 - 7 - 6. Open the carton of parts and check the parts according to the parts box list (See Fig. 11). 7. Check the parts of the parts bag according to the parts bag list (See Fig. 12). Fig. 12 Fig. 11 PRO-12 Parts bag 1 Parts bag 2 PRO-12A Parts bag 1 …

3, AMGO PRO-12 1 I. PRODUCT FEATURES AND SPECIFICATIONS FEATURES · Manual control air-operated system. · Mechanical self-lock and air-drived safety release. · Manual hydraulic power system, cable-drived. · Strengthen and Non-skid diamond platforms. · Adjustable platform and adjustable saf…

7, - 6 - 5. Move aside the parts and check the parts according to the shipment parts list (See Fig. 9). PRO-12A/PRO-12AX Fig. 10 43 43 PRO-12 Fig. 9 …

32, - 31 - Parts list for 220V/60Hz, Single Phase Item Part# Description Qty 1 81400180 Rubber Pad 2 2 81400130 Starting capacitor 1 3 81400088 Running capacitor 1 4 10420148 Cup Head Bolt with washer 4 5 81400066 Cover of Motor Terminal Box 2 6 8140…