AIC RSC-2ET Operation & User’s Manual

18, AIC RSC-2ET 10 Chapter 2. Hardware Setup RSC-2ET User Manual  Remove the HDD by pushing the HDD out from the backside of the HDD tray, 4 Push HDD out. Remove HDD. …

17, AIC RSC-2ET 9 Chapter 2. Hardware SetupRSC-2ET User Manual  Press the release button on the tray lever to loosen the lever.  Pull the tray lever outward completely.  Pull the tray out of the chassis. …

22, AIC RSC-2ET 14 Chapter 2. Hardware Setup RSC-2ET User Manual  Align the new backplane module and insert it into the chassis.  Secure the module with the lockPin to complete installation. 5 6 …

25, AIC RSC-2ET 17 Chapter 2. Hardware SetupRSC-2ET User Manual  Attach outer rail to the rack. Lock�  Push�Align� …

34, 26 Chapter 1. Product FeaturesRSC-2ET User Manual Chapter 4� Technical Support Taiwain, Global Headquarters Address: No� 152, Section 4, Linghang N� Rd, Dayuan District, Taoyuan City 337, Taiwan Tel: +886-3-433-9188 Fax: +886-3-287-1818 Sales Email: sales@aicipc�com…

6, ii Safety Instructions Before getting started, please read the following important cautions: • All cautions and warnings on the equipment or in the manuals should be noted. • Most electronic components are sensitive to electrical static discharge. Therefore, be sure to gro…

26, 18 Chapter 2. Hardware Setup RSC-2ET User Manual  Verify that the ball bearing retainer is locked forward.  Pull out the intermediate rail until iit is locked out.  Slide the release tab and push system into rack to complete installation. …

30, 22 Chapter 3. Hardware SpecicationRSC-2ET User Manual Console for MCU (JMCU_DBG) Pin Description 1 MCU_RXD 2 GND 3 MCU_TXD 2.54mm Header for Front I/O (JFRONT) • Fan number select Pin[5,6] Pin [3,4] Pin [1,2] Fan no. support Active Fan Locate Close Close Close…

19, 11 Chapter 2. Hardware SetupRSC-2ET User Manual  Match the dimples on the tray to insert the new HDD into the tray. Pull upward to remove the HDD from the HDD tray. Make certain that the HDD is not damaged during installation or removal process. …

28, 20 Chapter 3. Hardware SpecicationRSC-2ET User Manual 3�1�2 Connector Power Connector (JPWR1) Pin Description Pin Description 7 +12V 1 GND 8 +12V 2 GND 9 +3.3V 3 GND 10 +5V 4 MUTE_L 11 +5VSTBY 5 PSU_N1 12 PS_ON_L 6 GND Power Connector (JPWR2) Pin Description Pin Descript…

11, 3 Chapter 1. Product FeaturesRSC-2ET User Manual Front Panel 12 x 3.5-inch hotswap bays Item Description Power Button Power Status LED Drive Activity LED LAN Activity LED System Alert LED System ID LED System ID Button System Reset Button USB 3.0 Type A port …

29, 21 Chapter 3. Hardware SpecicationRSC-2ET User Manual I2C Connector (JI2C0, JI2C3, JI2C4) Pin Description 1 GND 2 I2C_CLOCK 3 I2C_DATA 4 N/A FAN Connector (JFAN1, JFAN2, JFAN3, JFAN4) Pin Description 1 GND 2 I2C_CLOCK 3 I2C_DATA 4 N/A Console for Expander (JEXP…

2, AIC RSC-2ET Table of Contents Preface �������������������������������������������������������������������������������������…

14, 6 Chapter 2. Hardware Setup RSC-2ET User Manual  Push the release button on both sides of the chassis.  Push the cover toward the rear panel.  Lift the top cover to complete removal. 1 Push button on both sides. 2 Push. 3 Lift. Chapter 2� Hardware Setup…